With the advances in mobile technology, all mobile network providers constantly implement new innovations to improve the quality of mobile network connection. However, today, it is still early to declare that certain mobile connection problems cannot occur. According to statistics, every third from mobile users in Canada face such unpleasant situations as dropped calls, mobile signal interference, and poor mobile internet connection at least several times a week. In this respect, a cell phone signal booster is in high demand in CA. Generally, the above mentioned mobile connection problems occur due to weak mobile signal perception. The cell phone signal booster represents a device that was directly developed to address the problem of poor mobile signal perception. A mobile signal booster or as it also called a cell phone repeater is not able to create a mobile signal, but it amplifies current mobile signal and spread the amplified signal coverage into areas with weak mobile signal perception, or where the signal is generally absent. A cell phone signal amplifier has been available in mobile market for more than 10 years already. It was firstly elaborated in America, where after detailed analysis of the problem, the FCC (Federal Communication Commission) has approved the use of mobile signal boosters to extend the range of cell networks into areas which get weak service, including homes, commercial buildings, offices and more.
A cell phone repeater, as the device is also called, operates on a very simple principle. Generally, the entire system consists of three parts: an external antenna, a signal amplifier and an inside antenna. The outside antenna captures current mobile signal and transfers it to the signal amplifier, where the signal is boosted. From the signal amplifier, the enlarged signal is passed to the internal antenna, from where it is spread to required areas.
The problem of poor mobile signal perception is relevant to all mobile network operators in Canada. In fact, it is not the problem of mobile network provider as some mobile users think. In the majority of cases, it is not a mobile network operator to blame, because there are a number of uncontrolled conditions which can be regulated by a mobile operator. For instance, within such a reliable and recognized mobile network provider in Canada as the Uniden certain mobile signal problems are still possible. That is why many Uniden mobile network users use a specific Uniden cell booster to enhance the power of mobile signal perception. The Uniden cell booster represents a new modern category of Smart signal boosters. This type of boosters applies powerful all-digital processors to clean the mobile signal before distributing the enlarged mobile signal. Generally, smart signal boosters are carrier specific, which means that there are different models for different mobile network operators. Such models are also considered to be more powerful in comparison with traditional models (analog signal boosters). They are capable of providing from 75 to 100 dB in gain as for example the Uniden cell phone booster, while analog signal boosterы are able to provide until 70 dB maximum. The Uniden cell phone booster is also perfect for ensuring stable mobile internet connection.
There are different causes that can have a certain impact on the power of your mobile signal. When it comes to poor mobile signal perception, there are two major contributing factors: distance from the nearest cell tower and obstructions resulting in interference. It is known that carriers provide mobile signal coverage through a network of strategically placed cell towers. Optimally, when you are situated within the mobile network area, your mobile phone will automatically connect with the nearest tower, and as you move, it will switch between towers. However, sometimes due to certain reasons, some cellular towers are placed far from each other. Thus, when you reach the edge of one tower’s coverage boundaries and there is no tower in immediate area to connect with, the power of your mobile signal perception is likely to fall down. This situation may lead to dropped calls, and mobile signal disconnection.
Nowadays, a cell phone signal booster still represents the most optimal device to deal with weak mobile signal perception. According to a number of surveys recently conducted among mobile users in South Africa have shown that today, a certain number of mobile users are still exposed to mobile signal connection problems including dropped calls, mobile signal disruption, signal disconnection and others. Generally such problems occur because of poor mobile signal connection that is why a network signal booster is largely distributed among mobile users in ZA. A cell phone signal booster is a special device that is applied in order to amplify current mobile signal and distribute the mobile signal coverage into areas that get poor services. Basically, a network signal booster operates in the following way. The entire system generally consists of three basic parts: an external directional antenna, a mobile signal amplifier, and an interior antenna. The external directional antenna is used to collect the cellular signal, which is later transmitted using a cable to the mobile signal amplifier, and then the amplified signal is transmitted to the interior antenna which retransmits the boosted signal into required areas. The more advanced types of amplifiers enable several cell phones to use the same repeater at the same time. Due to effectiveness and convenience these devices are in high demand in South Africa and other parts of the globe.
There are two general types of mobile boosters or, as they also sometimes called mobile signal repeaters. Analog signal boosters are the most common models of mobile repeaters. This type utilizes traditional technology to amplify (generally) all frequencies from mobile network carriers. These models are basically supplied with a kit of external antenna and cable. In most cases, such boosters require an installation. They area also called BDA units (Bi-Directional amplifiers). The other type of signal amplifiers is smart signal boosters. Smart signal boosters represent a new category of signal boosters. They apply powerful all-digital baseband processors to clean the mobile signal before distributing the amplified signal. Most of these model are highly powerful, as they are able to provide a gain of 100dB while analog boosters have gain of 50-70dB. Smart signal boosters are usually more expensive than traditional analog boosters. Most of the time, they are carrier-specific, that is they are specifically designed for certain mobile networks as for instance a Vodacom signal booster designed for Vodacom mobile network. The Vodacom is one of the major mobile network operators not only in South Africa, but also in other African countries including Tanzania, Democratic Republic of Congo, Mozambique and others. Although Vodacom is considered to provide one of the most reliable mobile networks in ZA, that doesn’t exclude the possibility of certain mobile signal inconveniences. Many users claim they cannot constantly sustain a reliable network connection. There are some areas, which are not able to provide a strong reception due to a number of different factors. Of course, some assume that such problems are due to network itself, but in most cases mobile connection problems are conditioned by certain circumstances that can be controlled or regulated by the mobile network operator.
To start with let’s first speak about a few historical facts referring to the Vodafone NZ mobile network operator. Vodafone New Zealand is a highly popular telecommunications company based Auckland, in New Zealand. The company is a subsidiary of the London-listed Vodafone Plc and was founded in 1998. Vodafone NZ is the country’s largest cell phone operator and has main offices situated not only in Auckland but in Wellington and Christchurch as well.
There are a few important facts in this mobile provider’s historical development that make its owners proud. First of all, Vodafone has invested millions of dollars for the improvement of 3G network in the urban areas of New Zealand. The company was also the first in the country to develop the 4G LTE network, not speaking of the high quality of its 2G network.
Due to so many advantageous features listed above Vodafone NZ boasts a great popularity among the residents of New Zealand having over 2.3 million customers nationwide. It seems like there could be nothing that would hinder the “perfect reputation” of this mobile provider however there appear to be certain places in New Zealand, more of them are rural ones situated far from the base stations of this mobile network operator, where the connectivity of the Vodafone signal becomes weak thus resulting in negative feedback of the customers. But we should mention once again that in the above mentioned situation the mobile provider has very little or no fault.
To prove our statement, let’s have a look at all the reasons that cause signal problems in different parts of New Zealand. After that judge yourself whether you should keep blaming Vodafone NZ for a bad signal or simply purchase a Vodafone signal booster and enjoy the strong connectivity anywhere around the country.
So, the reasons for weak connectivity are as follows:
As you can see, all the above mentioned reasons for weak connectivity are not because of your mobile carrier’s low quality services but rather are “natural phenomena” and can be overcome with the help of these “magic” devices we call cell phone signal boosters.
There are a few high-quality and popular mobile providers in the United Kingdom that are widely used by people. And though each of them provides high-standard connectivity in different coverage areas, there always remain certain locations that will result in you having interrupted calls and low signal.
Mobile signal boosters UK offers you a wide variety of choice among cell phone repeaters due to which you will be able to find a signal booster designed exactly for the mobile provider that you are using. You can choose the mobile repeater not only according to the mobile carrier you are using but also depending on the size of the area you need to cover, on its type i.e. whether it is a flat, a cottage, a large house with a garden, an office, a car, a boat or any other building or vehicle.
Here are the main mobile providers used in the UK. As it was already mentioned, you can find a signal booster that fits the carrier you are using. Let’s dive in into the topic deeper:
Signal Booster UK will release you from all the inconveniences caused by interrupted or missed calls and ensure you have high-quality signal and connectivity anywhere and anytime. You can even have boosters in your vehicles such as cars, trucks and boats and stay connected even when driving to faraway places or being out on the sea. Choose wisely and enjoy the high-quality signal boosted by our mobile phone signal boosters everywhere in the United Kingdom.
Optus is the third largest mobile operator in Australia and the company has preserved this position for a long time: for over 20 years it has been the second largest operator. Optus provides landline and mobile services to individuals and companies which include but are not limited to mobile, national and long-distance services, internet and media services. Over the last decade, the majority of the company’s public shares has been based on the mobile services, as it is mentioned at https://www.signalboostersaustralia.com/.
Being second mobile operator for such a considerably long time, the company has not attempted to challenge the main operator in Australia - Telstra, even when Vodafone’s reputation was continuously decreasing. Still, one important factor is the fact that the services provided by the company are always associated with reliability in the eyes of customers. So, in spite of the fact that people have a tendency to concentrate on the occasional problems, that they have experienced while using the services of an operator, Optus is seemingly trusted and has good managed to gain a good reputation.
How does Optus react to the developments of technology changes and what challenges does it face?
As any other mobile operator, Optus is always making huge investments in order to make its own network stronger. In addition to the regular improvements every few years a new generation of technology originates and a need to upgrade to the changes arises. So, years ago GSM technology was popular, then GPRS gained popularity. It was followed by 3G and then 4G.
Currently, the provider operates its 4G services over 700MHz frequency, and some others. It should be highlighted that the 4G connection provided by the company is quite fast, as a result, the operator supplies over 4.45 million customers with 4G connection.
Additionally, the company continues expanding its 4G and 3G networks in order not to be surpassed by other providers, nevertheless, this does not all in all excludes the possibilities of network outages and coverage problems.
The problems are conditioned by different factors, some of which can be solved by the company while others are not depended on it.
Let us deal with the first problem first. Such problems are mainly connected to the fact that the mobile towers of the company are sometimes too far from each other and consequently a high quality service cannot be supplied to the customers. This is especially common in so called bush land of Australia where the population is dense and the provider does not feel that the huge investments that a tower construction demands will be easily compensated, as a result the fewer number of population become somehow ignored. Still, it should be highlighted that such problems are not solved with the help of mobile signal boosters or repeaters as well, as in such areas a place with proper signal strength from where you can boost the signal cannot be found.
This means, that in case you are in an isolated area, say in the middle of a desert or far away in the mountains, and you need to travel for miles in order to get signal, you probably will not be able to make use of a booster.
As long as the operators do not have a wish to improve the signal quality in such areas, the only thing that remains to the habitants is the use of mobile signal boosters, by posting the external antenna in a place that receives better signal so that they do not become cut off the world.
The second type of problems that are not conditioned by the operator can be characterized as localized poor coverage determined by the construction material used for the building you are in. So, if you are living in a huge city and still you experience dropped calls and permanent weak signal, the reason for it is probably not the company itself. In such cases, the walls of the building and other barriers may hinder the signals and considerably lower their speed. The reason for such problem can be as simple as a metal layer in a wall or even concrete, as these materials have destructive interference on signals.
Besides, around some buildings a wire mesh can be found, and the electricity fields around it can.
Also have a bad influence on the signals.
A good way of understanding weather the construction material or the above-mentioned wires are the actual reason of the weak mobile signal or not can be as simple and easy as the comparison of the signal strength inside and outside the building.
It goes without saying that the regulation of this issue cannot be solved on the part of the provider, i.e. Optus in our case, still the problem can be easily solved by means of using a mobile signal booster or repeater which will gather the signal with an external antenna, magnify it and pass it to an inner antenna, so that the signals will bypass the construction materials that diminish their power.